EN
20mm Hidden-Edge Panel Wardrobe Door with Inset Pull
Compare side inset pull and dark textile-look panel appearance.
View this door design
A red-bronze 20mm aluminum closet door with a cross-pattern perforated panel and vertical recessed pull for decorative wardrobes and statement storage walls.
ESM / SELECTED DOOR
This 20mm perforated aluminum front pairs a cross-pattern perforated panel with a vertical recessed pull. The design is intended for wardrobes and dressing-room cabinetry.
ESM supplies custom door units for cabinet manufacturers, furniture brands and project buyers. Start with the pictured configuration, then specify the required sizes, finish, insert and cabinet fit.
Get a Quote for This Door
Door sample for this model
| Frame reference | 20mm perforated aluminum front |
|---|---|
| Shown insert | Cross-pattern perforated panel |
| Grip / handle | Vertical recessed pull |
| Application | wardrobes and dressing-room cabinetry |
| Order dimensions | Finished door width × height and quantity for each size; confirm against the selected system |
| Supply scope | Door units; insert, hardware and packing itemized in the quotation |
01 / DETAIL
Review the visible border and its finish together with the full door sample.
Model-specific catalogue detail; final interfaces follow the approved drawing.
Specify the cross pattern and red-bronze finish as a coordinated front; review hole appearance, edge treatment and handle alignment on the actual sample.
Catalogue reference for the selected design. Frame-series names do not replace a section drawing; confirm the finish with a physical sample.
02 / SELECTION
The illustrated front has a cross-pattern perforated panel. Confirm the actual panel material, pattern scale, backing and edge treatment with the frame finish. Keep the vertical recessed pull aligned across the cabinet elevation. If airflow is required, specify it separately: a patterned appearance does not establish an open, ventilating construction.
| Frame and insert | 20mm perforated aluminum front / Cross-pattern perforated panel |
|---|---|
| Opening detail | Vertical recessed pull |
| Sample review | Compare the actual finish, surface and edge treatment before approving a batch |
03 / HARDWARE
Hardware-family reference. Confirm the exact model, mounting interface and included components for this door.
Review the hinge head, frame interface and cabinet mounting arrangement together. Round-head and square-head styles are reference options; the selected hinge model determines the actual mounting details.
04 / SAMPLE FINISH
Inspect the corner line and metallic finish on an actual sample before confirming a production finish.
Review how the selected insert seats in its frame. The final section and assembly details must match the ordered system.
ESM sample photographs, edited for presentation. These samples show other frame sections and are not technical drawings of this model.
05 / PRODUCTION
Catalogue application illustration. Cabinet interiors provide context; this enquiry concerns the door units.
Specify the cross pattern and red-bronze finish as a coordinated front; review hole appearance, edge treatment and handle alignment on the actual sample.
List door sizes and quantities by position so handles, insert patterns and neighbouring fronts can be reviewed as one order.
The existing ESM collection video shows aluminum sections, corner finishes and sample displays across the wider range.
Collection video, not a model-specific opening or load test.
Agree the finish sample, door schedule, hardware scope and protective packing before production. The workshop photographs show general ESM door batches; finishes and configurations vary.
06 / QUOTE
Tell us about your wardrobes and dressing-room cabinetry project and reference this model. Approximate sizes, quantities, destination and contact details are enough to start the conversation. Drawings can follow by email or WhatsApp.
| Design reference | 20mm Cross-Perforated Aluminum Closet Door |
|---|---|
| Door schedule | Width × height, quantity and opening side for each position |
| Appearance | Cross-pattern perforated panel; Vertical recessed pull; list requested changes |
| Cabinet fit | Mounting surfaces, overlay / inset and clearance requirements |
| Supply and delivery | Included insert and hardware, packing, destination and project timing |
Confirm the actual insert and any backing layer. Mesh-like or perforated-looking artwork does not by itself define airflow, material construction or a ventilation rating.
Send the required finished dimensions and quantities. The frame, insert and hardware must be reviewed together for each size; catalogue sample dimensions are not a maximum-size or load rating.
Ask for the frame finish, insert, hardware, machining and packing to be listed separately where applicable. Sample arrangements, minimum order and production timing are confirmed for the selected configuration.
07 / RELATED
Compare side inset pull and dark textile-look panel appearance.
View this door design
Compare rounded channel pull and dark textile-look panel appearance.
View this door designOur professional sales team is ready to assist you.