EN
20mm Oval Pocket-Pull Glass Closet Door
Compare horizontal oval pocket pull and glass insert appearance.
View this door design
A red-bronze 20mm aluminum glass wardrobe door with a shaped fishtail recessed pull and concealed-catch layout for closets and garment display storage.
ESM / SELECTED DOOR
This 20mm concealed-catch frame pairs a glass insert appearance with a fishtail-shaped recessed pull. The design is intended for wardrobes and dressing-room cabinetry.
ESM supplies custom door units for cabinet manufacturers, furniture brands and project buyers. Start with the pictured configuration, then specify the required sizes, finish, insert and cabinet fit.
Get a Quote for This Door
Door sample for this model
| Frame reference | 20mm concealed-catch frame |
|---|---|
| Shown insert | Glass insert appearance |
| Grip / handle | Fishtail-shaped recessed pull |
| Application | wardrobes and dressing-room cabinetry |
| Order dimensions | Finished door width × height and quantity for each size; confirm against the selected system |
| Supply scope | Door units; insert, hardware and packing itemized in the quotation |
01 / DETAIL
Review the visible border and its finish together with the full door sample.
Model-specific catalogue detail; final interfaces follow the approved drawing.
The shaped horizontal pull is the defining detail; agree its height and orientation on paired doors before finalizing the door schedule.
Catalogue reference for the selected design. Frame-series names do not replace a section drawing; confirm the finish with a physical sample.
02 / SELECTION
Start with the glass insert appearance shown in this design. Compare the tone, visibility and texture under the planned cabinet lighting, then confirm the glass construction and its fit with the frame.
Compare tinted, reeded, ripple, frosted, wired and laminated sample styles for your cabinet project. Start with the character of the pictured door, then discuss the combination you prefer.
Physical samples from the ESM glass collection. Confirm the selected glass specification and frame compatibility for your order.
03 / HARDWARE
Hardware-family reference. Confirm the exact model, mounting interface and included components for this door.
Review the hinge head, frame interface and cabinet mounting arrangement together. Round-head and square-head styles are reference options; the selected hinge model determines the actual mounting details.
04 / SAMPLE FINISH
Inspect the corner line and metallic finish on an actual sample before confirming a production finish.
Review how the selected insert seats in its frame. The final section and assembly details must match the ordered system.
ESM sample photographs, edited for presentation. These samples show other frame sections and are not technical drawings of this model.
05 / PRODUCTION
Catalogue application illustration. Cabinet interiors provide context; this enquiry concerns the door units.
The shaped horizontal pull is the defining detail; agree its height and orientation on paired doors before finalizing the door schedule.
List door sizes and quantities by position so handles, insert patterns and neighbouring fronts can be reviewed as one order.
The existing ESM collection video shows aluminum sections, corner finishes and sample displays across the wider range.
Collection video, not a model-specific opening or load test.
Agree the finish sample, door schedule, hardware scope and protective packing before production. The workshop photographs show general ESM door batches; finishes and configurations vary.
06 / QUOTE
Tell us about your wardrobes and dressing-room cabinetry project and reference this model. Approximate sizes, quantities, destination and contact details are enough to start the conversation. Drawings can follow by email or WhatsApp.
| Design reference | 20mm Fishtail Recessed-Pull Wardrobe Glass Door |
|---|---|
| Door schedule | Width × height, quantity and opening side for each position |
| Appearance | Glass insert appearance; Fishtail-shaped recessed pull; list requested changes |
| Cabinet fit | Mounting surfaces, overlay / inset and clearance requirements |
| Supply and delivery | Included insert and hardware, packing, destination and project timing |
Identify the illustrated fishtail-shaped recessed pull and glass insert appearance in your enquiry. List any changes separately and provide handle height, door handing and quantities for each door size.
Send the required finished dimensions and quantities. The frame, insert and hardware must be reviewed together for each size; catalogue sample dimensions are not a maximum-size or load rating.
Ask for the frame finish, insert, hardware, machining and packing to be listed separately where applicable. Sample arrangements, minimum order and production timing are confirmed for the selected configuration.
07 / RELATED
Compare horizontal oval pocket pull and glass insert appearance.
View this door design
Compare side inset pull and light glass insert appearance.
View this door designOur professional sales team is ready to assist you.