EN
Perforated Aluminum Panel Cabinet Door with Square Frame
Compare slim bar pull and perforated aluminum insert.
View this door design
A full aluminum panel wardrobe door with a repeating perforated pattern and integrated vertical pull, providing a distinctive ventilated facade for fitted storage.
ESM / SELECTED DOOR
This decorative aluminum panel front pairs a repeating curved perforation pattern with an integrated vertical pull. The design is intended for wardrobes and dressing-room cabinetry.
ESM supplies custom door units for cabinet manufacturers, furniture brands and project buyers. Start with the pictured configuration, then specify the required sizes, finish, insert and cabinet fit.
Get a Quote for This Door
Door sample for this model
| Frame reference | Decorative aluminum panel front |
|---|---|
| Shown insert | Repeating curved perforation pattern |
| Grip / handle | Integrated vertical pull |
| Application | wardrobes and dressing-room cabinetry |
| Order dimensions | Finished door width × height and quantity for each size; confirm against the selected system |
| Supply scope | Door units; insert, hardware and packing itemized in the quotation |
01 / DETAIL
Review the visible border and its finish together with the full door sample.
Model-specific catalogue detail; final interfaces follow the approved drawing.
Review the repeated curved cutout pattern over the full panel height, including how the pattern finishes at the frame and handle.
Catalogue reference for the selected design. Frame-series names do not replace a section drawing; confirm the finish with a physical sample.
02 / SELECTION
The illustrated front has a repeating curved perforation pattern. Confirm the actual panel material, pattern scale, backing and edge treatment with the frame finish. Keep the integrated vertical pull aligned across the cabinet elevation.
| Frame and insert | Decorative aluminum panel front / Repeating curved perforation pattern |
|---|---|
| Opening detail | Integrated vertical pull |
| Sample review | Compare the actual finish, surface and edge treatment before approving a batch |
03 / HARDWARE
Hardware-family reference. Confirm the exact model, mounting interface and included components for this door.
Review the upper and lower mounting positions as part of the door and cabinet design. The pivot arrangement, fixing interfaces and available clearance must suit the selected frame, insert and door size.
04 / SAMPLE FINISH
Inspect the corner line and metallic finish on an actual sample before confirming a production finish.
Review how the selected insert seats in its frame. The final section and assembly details must match the ordered system.
ESM sample photographs, edited for presentation. These samples show other frame sections and are not technical drawings of this model.
05 / PRODUCTION
Catalogue application illustration. Cabinet interiors provide context; this enquiry concerns the door units.
Review the repeated curved cutout pattern over the full panel height, including how the pattern finishes at the frame and handle.
List door sizes and quantities by position so handles, insert patterns and neighbouring fronts can be reviewed as one order.
The existing ESM collection video shows aluminum sections, corner finishes and sample displays across the wider range.
Collection video, not a model-specific opening or load test.
Agree the finish sample, door schedule, hardware scope and protective packing before production. The workshop photographs show general ESM door batches; finishes and configurations vary.
06 / QUOTE
Tell us about your wardrobes and dressing-room cabinetry project and reference this model. Approximate sizes, quantities, destination and contact details are enough to start the conversation. Drawings can follow by email or WhatsApp.
| Design reference | Decorative Perforated Aluminum Wardrobe Door with Integrated Pull |
|---|---|
| Door schedule | Width × height, quantity and opening side for each position |
| Appearance | Repeating curved perforation pattern; Integrated vertical pull; list requested changes |
| Cabinet fit | Mounting surfaces, overlay / inset and clearance requirements |
| Supply and delivery | Included insert and hardware, packing, destination and project timing |
For this decorative aluminum panel front, provide the door width and height, handing, cabinet mounting surfaces and nearby obstructions. Identify the required movement so the selected hardware and clearance can be reviewed together.
Send the required finished dimensions and quantities. The frame, insert and hardware must be reviewed together for each size; catalogue sample dimensions are not a maximum-size or load rating.
Ask for the frame finish, insert, hardware, machining and packing to be listed separately where applicable. Sample arrangements, minimum order and production timing are confirmed for the selected configuration.
07 / RELATED
Compare slim bar pull and perforated aluminum insert.
View this door design
Compare slim ribbed pull and fine micro-perforated insert.
View this door designOur professional sales team is ready to assist you.