EN
U01
Microfiber-series surface reference
A fine grained leather-look reference from the catalogue microfiber selection. Review the actual feel, sheen and backing on the approved sample.
Explore the microfiber leather-finish option for cabinet and wardrobe fronts. Its fine-grained leather-look surface can be compared with your selected handles, glass and other cabinet finishes.
Review the actual material, sheen and backing on a physical sample. Send yishimei ESM your door drawings, color preference and quantities to discuss the proposed cabinet application.
01 / Product design
Explore a leather-look cabinet finish from the catalogue microfiber series. Start with the surface sample and color, then specify the backing, core, edge and hardware as part of the complete door assembly.
This family is grouped by the catalogue microfiber material category. The cabinet visualization explores a U01-inspired fine-grain appearance. Use the original references and physical samples to confirm the actual composition, grain scale, color and complete door assembly.
02 / Texture selection
Select the surface option first, then its color reference. Compare the actual grain, relief, sheen and material specification on a physical sample.
A fine grained leather-look reference from the catalogue microfiber selection. Review the actual feel, sheen and backing on the approved sample.
Surface names describe appearance or the source material category. Composition, manufacturing method and door construction are confirmed for the selected specification.
03 / Color references
This family contains 16 catalogue color references across 1 surface option. The initial selection below introduces U01. Open each chart to compare the complete range for that option.
Browse all 16 color references below. Tap a swatch to open its image or complete source chart.
Reference 01
Reference 02
Reference 03Reference 04
Reference 05
Reference 06Reference 07
Reference 08
Reference 09Reference 10
Reference 11
Reference 12Reference 13
Reference 14
Reference 15Reference 16
Color references are for initial selection. Photography, lighting, displays and batches can affect appearance. A reference number is local to its surface option. Confirm availability and approve a physical sample.
04 / Cabinet planning
The visualization explores the U01 microfiber-series appearance on opaque fronts beside glass storage. It is a design reference rather than a verified sample door. Send the cabinet elevation, intended room use and chosen color, then review a finished sample showing the front, corner, reverse face and proposed grip.
Send an elevation with every door position, finished size, opening direction and grip preference. Include adjacent modules that affect alignment. The visualization illustrates a possible arrangement; the assembly and supply scope are defined by the approved drawing and quotation.
05 / Surface and edge details
Ask the selected sample to identify the surface construction and backing. A close photograph of the grain does not establish its thickness, bonding method or assembly suitability.
Review how the face material meets the door edge, grip and reverse. These junctions should be confirmed on a physical assembly rather than inferred from a flat swatch.
These surface photographs show appearance. They do not show a door cross-section, edge build-up or tested hardware assembly. Review those details on the approved sample and drawing.
06 / Configuration checklist
Use the following checkpoints to connect the selected finish to your cabinet. Clear door positions and supply requirements make the quotation easier to compare.
Mark the relevant door positions and show the preferred arrangement on the elevation.
Use the selected physical sample to assess this detail before the finish is approved.
Include the proposed grip and any neighboring components that affect fixing or clearance.
Record the approved choice with the material reference so production and replacement requirements are clear.
07 / Project specification
The door is quoted as a defined configuration. Use the table below to state the requirements rather than relying on dimensions or performance inferred from photographs.
| Product scope | Decorative cabinet or wardrobe door fronts in the selected surface. Identify whether the enquiry requires door leaves only, frames, hardware or a complete cabinet package. |
|---|---|
| Surface and color | U01 — Microfiber-series surface reference. Quote the option and its own color reference together. |
| Finished dimensions | Provide height × width for every leaf, quantity per size and any required thickness. Feasible sizes and total door thickness are confirmed after construction review. |
| Core, backing and edges | Specify the proposed core, reverse face, edge treatment and any perimeter profile. Final construction is confirmed with the quotation and sample. |
| Opening and hardware | State the preferred opening system, hinge or track requirements, grip type and installation conditions. Compatibility and included components need confirmation. |
| Material width | Any roll-width information in the catalogue refers to surface material. It does not establish a finished door size; material thickness is also separate from total door thickness. |
| Project and delivery | Provide intended room use, destination country, quantity and target schedule. Confirm sample arrangements, minimum order, lead time, packing and delivery terms for the selected configuration. |
08 / Sampling and order process
Keep the surface sample and the door drawing connected throughout selection. This helps resolve appearance and assembly details before production is confirmed.
Send door sizes, quantities, the cabinet drawing, destination and the preferred surface and color references.
Confirm texture, color, sheen and the proposed edge or corner. Request a finished sample when the assembly detail matters.
Review the door construction, grip arrangement, hardware scope and drawing with the quotation before placing the order.
Agree availability, production schedule, packing, inspection requirements and delivery terms for the approved configuration.
09 / Frequently asked questions
It identifies the material category used in the source catalogue. Confirm the actual composition, coating and backing for the selected sample and quotation.
No performance rating is established by the catalogue photographs. If those properties matter to the project, request relevant data for the selected material and complete door assembly.
The cabinet visual is AI-generated from catalogue material references. It illustrates the selected finish character and layout, not a photographed ESM installation or a measured pattern scale. Confirm actual color, texture repeat, edges and complete door construction with physical samples and approved drawings.
Send the finished size of each leaf, quantity, cabinet elevation, selected surface and color, preferred opening system and grip, plus the delivery destination. Identify whether profiles, hardware and adjacent cabinet modules are included in your request.
They are catalogue references for shortlisting. Lighting, photography, display settings and material batches affect appearance. Confirm current availability and approve a physical sample in the chosen surface; a displayed image is not a stock commitment.
Those items are confirmed for the selected door configuration. The surface material photograph does not establish the core or the total thickness. Ask the quotation to state the backing, edge treatment, opening system and included hardware clearly.
They depend on the chosen surface, door configuration, material availability, quantity and destination. Include your target schedule and sample requirements with the enquiry, then confirm the order and delivery terms in the quotation.
Request care guidance for the approved surface and assembly. Confirm intended room conditions and compatible cleaning products. Different leather-look materials can have different requirements, so do not apply one care or performance assumption to every option.
Microfiber Leather-Finish Cabinet Doors
Share the finished door sizes, quantity, selected surface and color references, grip preference, cabinet drawing and destination country. We can then review the configuration and confirm the supply scope.
Our professional sales team is ready to assist you.
